NavPod
NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208
SKU 54027·Display Mounts
$599.99
RMX4811 RailMount Pre-Cut for Garmin 8008/8208RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25"...
1
Sold out
·Ships from US distribution
Authorized dealerGenuine NavPod
Secure checkoutPowered by Shopify
Expert supportTalk to a rigger
Will it fit your boat?
Size it to your vessel first
Run your loads through the Energy Planner to confirm this gear covers your daily draw — and see if you need more panels or battery.
Open the Energy Planner →RMX4811 RailMount Pre-Cut for Garmin 8008/8208
RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.
Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable Face:8.375"H x 10.5"W x 5"D
Max Cutout: 7.125"H x 10.25"W
All RailMount NavPods include
RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.
Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable Face:8.375"H x 10.5"W x 5"D
Max Cutout: 7.125"H x 10.25"W
All RailMount NavPods include
- Acrylic capped ABS plastic
- Chromed stainless steel tamper-proof fasteners
- Double Seal for watertight integrity
- Models are available pre-cut for popular electronics
- Chromed stainless steel arm with swivel mount
- Both sets of adaptors included for 1" or 1.25" diameter tubing
BrandNavPod
SKU54027
UPC659988108927
TypeDisplay Mounts
Good to know
- Genuine NavPod product from an authorized dealer.
- Ships from US distribution.
- Questions about fit or installation? Contact us before you order.
What's in the box
★★★★★
No reviews yet
Be the first to review the NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/.... Bought one? We'd love to hear how it's working aboard.
Share your experience