Marketplace/Plumbing & Pumps › Impellers/Jabsco Impeller Kit - 10 Blade - Neoprene - 2-9/16" Diameter
Jabsco
Jabsco Impeller Kit - 10 Blade - Neoprene - 2-9/16" Diameter
SKU 50237·Impellers
$54.99
Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions: Diameter:2-9/16" Shaft Width:⅝" Shaft Diameter:2" Insert Material:BrassJabsco flexible impellers can be fitted to most makes and m...
1
In stock
·Ships from US distribution
Authorized dealerGenuine Jabsco
Secure checkoutPowered by Shopify
Expert supportTalk to a rigger
Will it fit your boat?
Size it to your vessel first
Run your loads through the Energy Planner to confirm this gear covers your daily draw — and see if you need more panels or battery.
Open the Energy Planner →Impeller Kit
Material:Neoprene
Drive Type:Spline Drive
Number of Blades:10
Dimensions:
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
Material:Neoprene
Drive Type:Spline Drive
Number of Blades:10
Dimensions:
-
Diameter:2-9/16"
-
Shaft Width:⅝"
- Shaft Diameter:2"
Insert Material:Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
⚠ California Prop 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm. See P65Warnings.ca.gov.
BrandJabsco
SKU50237
UPC671880570749
TypeImpellers
Weight0.45 lb
Good to know
- Genuine Jabsco product from an authorized dealer.
- Ships from US distribution.
- Questions about fit or installation? Contact us before you order.
What's in the box
★★★★★
No reviews yet
Be the first to review the Jabsco Impeller Kit - 10 Blade - Neoprene - 2-9.... Bought one? We'd love to hear how it's working aboard.
Share your experience